Home » Cisco Routers » Cisco-Linksys WET610N Dual-Band Wireless-N Gaming and Video Adapter


Category : Cisco Routers
Do not lose your chance to get this rare opportunity!
* Discount only for limited time, Buy it now!



"This Best Selling Cisco-Linksys WET610N Dual-Band Wireless-N Gaming and Video Adapter Tends to SELL OUT VERY FAST! If this is a MUST HAVE product, be sure to Order Now to avoid disappointment!"

WiFi setup
Cisco wireless Routers
Image by niallkennedy
Linksys and Cisco wireless routers in the main room

Cisco-Linksys WET610N Dual-Band Wireless-N Gaming and Video Adapter


Cisco-Linksys WET610N Dual-Band Wireless-N Gaming and Video Adapter


Linksys Wireless N Ethernet Bridge Linksys WET610N, Wireless-N Ethernet Bridge. The versatile Wireless-NEthernet Bridge can make any wired Ethernet-equipped device a part of your wireless network. At home, use the video-optimized Bridge to connect digital video recorders, set-top boxes, or computers toyour Wireless-N network. In the office, convertyour wired-Ethernet printer, scanner, camera, network storage device, notebook, or desktop for wireless connectivity. Since the Bridge is based on dual-band Wireless-N, it works with any device supporting Wi-Fi standards, and is compatible with Wireless-G, -A, and -B.The Wireless-N Ethernet Bridge works on any platform and under any operating system! Since there’s no drivers to load, setup is a snap — configure the network settings through yourPC’s web browser, then plug it into your device and go.

  • Convert any wired-Ethernet device to speedy Wireless-N Connectivity
  • Optimized for video, so videos look smooth with less frame drops
  • Compatible with any device that supports Wi-Fi standards and also with any operating system
  • Easy setup and powerful security features, including WPA2 and Wi-Fi Protected Setup
  • Measures 5.71 x 4.17 x 2.05 inches and weighs 5.61 ounces; 1-year limited warranty

We have searched the web to find the best prices available. Click Here to find out where to get the best deal on Cisco-Linksys WET610N Dual-Band Wireless-N Gaming and Video Adapter

Check for Special Price Today!

Wooww, nice product! I want to share this product!
facebook
twitter
stumbleupon
Delicious
reddit
Digg

What customers say about Cisco-Linksys WET610N Dual-Band Wireless-N Gaming and Video Adapter?

  1. 119 of 128 people found the following review helpful
    5.0 out of 5 stars
    Excellent for Converting Wired To Wireless, April 5, 2009
    By 

    This review is from: Cisco-Linksys WET610N Dual-Band Wireless-N Gaming and Video Adapter (Personal Computers)

    I bought the WET610N for my Samsung BD-P1600 Blu-Ray Player. My options were either wired, which I didn’t want to do, or buy a proprietary dongle from Samsung. I chose the option that Samsung did not mention – I bought the WET610N! The unit was easy to setup, and the instructions were clear. I’ve never been fond of using Linksys CD’s to setup this kind of equipment, but I have to say it was painless and quick compared to some others I’ve seen. The value of this unit is simply that it will work with ANYTHING that wants a “wired” network connection. So, it doesn’t matter if it’s a video game system, a DVR type device, or as in this case a blu-ray DVD Player. For this reason, the unit is a great value and will be in use for a long time, even when the current equipment I am using it with now is long gone.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  2. 68 of 73 people found the following review helpful
    5.0 out of 5 stars
    Quick setup – up in 10 minutes, September 9, 2009
    By 
    E. Linder
    (REAL NAME)
      

    Amazon Verified Purchase(What’s this?)
    This review is from: Cisco-Linksys WET610N Dual-Band Wireless-N Gaming and Video Adapter (Personal Computers)

    Update 10/31/10:

    This product has worked *flawlessly* for a year straight! Highly recommended without reservation!

    Update 10/2/09:

    New firmware update available from Linksys 8/31/09 (I went from 1.0.01 to 1.0.03 today). After applying new firmware, the reported signal strength increased significantly. So did the consistency and reliability of pings (previously would vary between 2ms and 410 ms as well as skip an occasional ping – now consistently below 5 ms!). I would recommend this product, but be sure to be running firmware 1.0.0.03. This update may address some (but not all) of the issues that previous reviewers experienced.

    Original review:

    Quick shipment from Amazon. As much as I dread Setup wizards, I used the wizard supplied on the CD-ROM, which I ran from my laptop, which is connected wirelessly via the wireless router. Connected bridge to router with the supplied straight-through Ethernet cable. The wizard quickly detected available wireless networks (I selected mine – not my neighbors’). Asked me for passphrase (it knew I use WPA2 encryption) for router (Linksys WRT54G), waited a bit, then wizard told me to disconnect bridge from router and then connect the bridge to my remote device (in my case – a home-theater-in-a-box) (HTIB) with an wired ethernet connection. A bit later, wizard announced setup finished. Instantly able to watch streaming Netflix and listen to Pandora on the HTIB.

    Prior to running wizard, I added the MAC address of the bridge (it’s on the underside of the unit) to the allowed list of “PCs”) on my router’s list of allowed MAC addresses. Second, I ensured that I had a sufficient range of DHCP addresses dispensed by the DHCP server on my router (total of 3 – one for the laptop, one for the wireless printer, and now added a third for this bridge). Third, I had my router passphrase readily available to supply to the wizard.

    I think that since I was well prepared, the setup was flawless and quick. I totally understand why wizards are used – they’re for novices to easily set up their stuff. In this case, I think it took the wizard less time to set up the device than it would have if I were to have chosen to set up the bridge manually (which is an undocumented option). A novice would have a struggle with a manual setup, I’m sure.

    Signal strength on the bridge indicates to be a bit weak for business use, but for home use, it’s working great for my sole application. One could certainly add more devices on the bridge side by connecting the bridge to a switch to provide additional Ethernet ports. Of course, the bridge will pass DHCP info to any device connected to any such switch. And of course, no address needed for a(n) (unmanaged) switch.

    The only thing I’m uncertain about is this product’s longevity. I did have an early Linksys WRT54G totally fail on me, but I’m hoping that having placed my current one on a UPS, this won’t happen again. I have confidence in current Linksys products.

    I hope Amazon buyers find this review helpful.

    I recommend this product.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  3. 74 of 86 people found the following review helpful
    3.0 out of 5 stars
    Works, but forget Linksys customer service, July 21, 2009
    By 
    E. Turner
    (REAL NAME)
      

    Amazon Verified Purchase(What’s this?)
    This review is from: Cisco-Linksys WET610N Dual-Band Wireless-N Gaming and Video Adapter (Personal Computers)

    After I got the unit set up, it works fine for my purposes – connecting my blu-ray player to my wireless home network. The distance is short, less than 30 feet, and just in the next room. The connection will not carry a lot of video smoothly, but it works OK.

    But if you are not able to handle a few set-up issues yourself, reconsider. It took me the second try to set up the device through their setup disk. Then it couldn’t find my wireless network, which had 2 laptops on it and was running fine. I called technical support. The manufacturer CLAIMS to offer free technical support during the 1-year warranty. But when I called, the very day my unit was delivered, they wouldn’t help me unless I bought extended coverage for their router I was using with it. I didn’t have any problems with the router, but they wouldn’t tell me how to connect my brand new ethernet bridge to the router because the router warranty had expired. Real ripoff. These things HAVE to go through a router so everyone who calls for technical support will have a router. I think this allows them to avoid giving any technical support on this unit without the customer paying. I figured it out myself eventually – without the assistance of the very unhelpful representative.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No


NETGEAR  Universal N600 Dual Band Wi-Fi to Ethernet Adapter (WNCE3001)

Check Special Price!
NETGEAR Universal N600 Dual Band Wi-Fi to Ethernet Adapter (WNCE3001) The...

Cisco-Linksys WPS54G Wireless-G 802.11g Print Server

Check Special Price!
Cisco-Linksys WPS54G Wireless-G 802.11g Print Server Cisco-Linksys WPS54G Wireless-G 802.11g Print...

Canon PIXMA MX870 Wireless Office All-in-One Printer (4206B002)

Check Special Price!
Canon PIXMA MX870 Wireless Office All-in-One Printer (4206B002) The PIXMA MX870...

8dB Verizon Wireless Pantech UML290 LTE USB Modem External Antenna

Check Special Price!
Doorbell, repurposed Image by Roo Reynolds This board now takes its...

For all your Wireless Needs at the Lowest Price
Low Cost Wi-Fi is a participant in the Amazon Services LLC Associates Program,
an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com